It’s done. Finally. Whew.
Our deck has been a point of contention between me—the whirling dervish—and Alex — the pondering engineer— since I moved in.
I love being outside, outside, outside. If I could figure out how to relocate my desk, day-job work computer, external monitor out to the deck, I would!
He loves air conditioning.
The original deck was poorly constructed by whom we believe to be a bunch of drunken folks who were unable to contemplate planning, straight lines or long-term results.
It’s been falling apart for a long time. Husband replaced a few boards a couple of years ago before a party lest someone put their big foot (his, no doubt) through one of them. I’ve repeatedly re-pounded nails (yes, nails) into the boards lest I walk bare-footed across them and need stitches.
It was time.
I put my foot down. Luckily, not through a board.
The planning began in April, with the first de-construction starting on May 14th. Alex began weekly traveling before Memorial Day and hadn’t been home for a full week until last week. We still managed to put the finishing touches on yesterday and call it done!
Here’s how to survive rebuilding a deck and stay married:
1. Decide what you want.
I spent hours drooling over Pinterest decks, but had to concede that logic should prevail on the design. We decided to tear off the rails and decking and see what kind of shape the frame was in.
2. How will you deconstruct?
A couple of different sized pry bars turned out to be the simplest way. Position the small one under a screw or nail head, pound it in tight and leverage against it. Do that along the board and then get the big pry bar and using my body weight or Alex’s forearms, heave the wood up.
4. Getting rid of the old boards?
We opted for the Bagster. Do pay attention to the instructions, folks, and don’t over fill. We cut the boards to fit, stacked them in, made a call and whoosh, they were gone.
5. Do you want it to last 10 years?
20? Would 5 be enough? This answer leads to the deck material. We choose premium pressed lumber and metal balustrades.
6. Purchase adequate supplies.
Decide what type of screws — not the assorted nonsense our predecessors used—will work best for your boards and design. In our case 3.5” green deck screws. Although your local hardware store can probably do these calculations for you, the engineer stepped up to compute the number of boards required. He ended up off by two. Not bad!
To match the deck stain color. Long ago the decks at my Montana house were redwood. For that money, the stain was a clear coat. For pressure treated wood, I indulged in my favorite color: green. Dark, solid green stain for the rails and gates (basically vertical pieces) and a semi-transparent green for the decking (any horizontal piece). Remember to get a tiny test can first so you can try out the color. We skipped our first choice and opted for one darker.
Do you have fully charged cordless drills for the screws (his and hers), extension cords for the electric drill, a square for aligning the screws from board to board, a carpenter’s pencil–or two–a couple of measuring tapes, saw horses, a table saw, a jigsaw for cutting around posts, and a circular saw for cutting off the ends of the board—once they are screwed in. We figured out that was entirely easier and gave a neater edge than pre-cutting them.
We chose to lay our boards straight rather than duplicate the bad angled design we inherited. We laid them tight against each other.
My job was drilling the holes, Alex’s putting the screws in. Ladies, if I ever win the lottery, I am creating power tools with as much power as the big ones, but to fit our smaller hands.
Between thunderstorms, it took approximately 80 hours for the two of us to complete this project. Not bad for non-professionals.
Finding the right deck furniture and a gazebo was an adventure all its own. My quick blurb is: the furniture from Target was simple to put together—I did it alone in about 2.5 hours. The gazebo, also from Target, was a nightmare. But it’s in place now and I’m a happy woman!
Friday nights if you’re trying to find us, it’s wine time on the deck!